Replacing the Bulb in Your KPM CADRE Lamp: A Step-by-Step Guide

By Königliche Porzellan-Manufaktur Berlin - KPM Berlin | Published: 2026-10-31

Category: How-to Guides

Learn how to safely replace the Leuchtmittel in your KPM CADRE lamp, from switching off the power to choosing the correct E27 LED bulb for your fixture.

Quick answer

Switch off and unplug the CADRE lamp, let the old bulb cool, unscrew it counterclockwise, and fit the correct E27 LED replacement—either the black G95 for CADRE Schwarz or the silver G95 for CADRE Stahl. Never force a bulb or use one that exceeds the fixture's specified wattage.

Why the right bulb matters for your CADRE lamp

The CADRE lamp was developed with mawa Design, and its E27 socket accepts standard screw-fit bulbs. However, the two finish variants—Schwarz and Stahl—are paired with specific LED G95 head-mirror bulbs that differ in color and wattage. Using the wrong bulb can affect both the look of the fixture and how light is directed.

The black CADRE bulb is rated at 600 lm and is dimmable, while the steel version is 6.5 W and 2700 K. Neither specification is universal across all CADRE lamps, so always check your lamp's finish before ordering a replacement. If you are unsure which variant you own, the finish of the lamp housing is the reliable indicator: black for Schwarz, silver-toned for Stahl.

Safety first: when to call a professional

Replacing a screw-fit bulb is a simple household task, but the CADRE lamp is a precision fixture. If the bulb is stuck, the socket feels loose, or you notice any damage to the cable or housing, stop and consult a qualified electrician. Do not attempt to repair the socket yourself.

Also, never exceed the maximum wattage stated on the lamp's label or in its instructions. The supplied CADRE bulbs are low-wattage LEDs; using a higher-wattage bulb could overheat the fixture and damage the finish.

Steps to replace the Leuchtmittel in your CADRE lamp

Switch off and unplug: Turn off the lamp at the switch and remove the plug from the wall socket. Wait a few minutes if the bulb has been on, as LED bulbs can still be warm. Never rely on the switch alone—unplugging prevents accidental power-on.
Remove the old bulb: Hold the bulb firmly and unscrew it counterclockwise. If it resists, do not force it; a stuck bulb may indicate a damaged socket. Use a cloth for extra grip if needed. If the bulb will not turn, stop and seek professional help rather than applying excess force.
Match the replacement to your lamp finish: For CADRE Schwarz, use the black G95 LED bulb (product 2191308). For CADRE Stahl, use the silver G95 LED bulb (product 2191307). Check the finish of your lamp housing to confirm which you need. Ordering the wrong color variant will visibly mismatch the fixture.
Screw in the new bulb: Insert the new bulb into the E27 socket and turn clockwise until it is snug. Do not overtighten—hand-tight is sufficient. The head-mirror design should face outward as intended. Overtightening can crack the bulb base or damage the socket contacts.
Test and restore power: Plug the lamp back in and switch it on. If the bulb does not light, switch off and unplug again, then check that it is fully seated. If it still fails, the bulb may be faulty or the socket may need attention. A flickering or non-lighting bulb after correct fitting is a sign to contact KPM support or an electrician.

Product facts

Leuchtmittel für Leuchte CADRE, Schwarz: LED G95 head-mirror bulb, 600 lm, black matte, dimmable, 2700 K, E27 base. This is the correct replacement for the CADRE Schwarz; its black finish blends with the lamp and the dimmable function preserves full brightness control.
Leuchtmittel für Leuchte CADRE, Schwarz
Leuchtmittel für Leuchte CADRE, Stahl: LED G95 head-mirror bulb, 600 lm, 6.5 W, 2700 K, silver, E27 base. Choose this for the CADRE Stahl to maintain the intended silver look and warm color temperature.
Leuchtmittel für Leuchte CADRE, Stahl